|
|
 5v regulator, 5 volt regulator, 5v voltage regulator |
|
Founded in 1998, China Kaide Car Parts Co., Ltd. is a 5v regulator, 5 volt regulator, 5v voltage regulator manufacturer and supplier of car parts and accessories. We can provide our customers with high quality auto spare parts and qualified auto performance parts for many kinds of cars, buses, and trucks. It has years of OES and OEM 5v regulators, 5 volt regulators, 5v voltage regulators experiences and passed the TUV certification of ISO/TS16949 quality system. We have introduced advanced technology and equipment to integrate further development and manufacture. |
>> Products Show |
|
|
5v regulators, 5 volt regulators, 5v voltage regulators Show |
|
|
|
1. The bypass thyristor Vabs is situated in the excitation circuit between one phase and the anode-side output of the rectifier bridge in series with the bypass resistor Rabs (Fig. 4). The bypass circuit, parallel to excitation winding RE, is switched on in the time ranges at which valve V5 is conductive. Part of the excitation current can therefore be made to bypass the excitation winding. This takes place within every period for a fraction of that period (control angle). The excitation current is reduced in accordance with the control angle and the resistance ratio Rabs/ RE. The programmer is the element which makes it possible to load the program in the PIC FLASH memory. It is connected to the computer by series or parallel connections.
It can either be done by yourself or buy it.The model presented here was bought ready made at 390FF, which is expensive compared to the home made systems, but you don't need any equipment to make it. You will find diagrams in the links at the top of the page. Note that it should also be powered with 12V. |
|
|
|
|
2. The Boarduino is designed to be inserted into a solderless breadboard, any standard breadboard will be suitable. Simply insert into the breadboard, making sure that the header pins are straight so that they can be easily inserted. To remove, grab both ends of the board and gently rock back and forth. This will keep the header pins from bending. A thyristor voltage regulator was fitted so as to upgrade the ± 5% voltage tolerance previously achieved to ± 0.5%. The regulator in question is a pure voltage regulator, which uses the excitation current to keep the generator voltage constant irrespective of the load. The generator voltage is fed via the measuring circuit transformer to the regulator and rectified by a load-side rectifier bridge. The actual value signal and regulator input voltage are derived from this DC voltage. The voltage setpoint is input via an internal reference value potentiometer or external reference value setter. After an internal setpoint/ actual value comparison, the regulator amplifier outputs a DC voltage, which is converted by a loadside pulse generator into a firing pulse with adjustable time offset for the bypass thyristor. |
|
|
|
|
|
|
|
|
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian