|
|
 precision regulator |
|
Founded in 1998, China Kaide Car Parts Co., Ltd. is a precision regulator manufacturer and supplier of car parts and accessories. We can provide our customers with high quality auto spare parts and qualified auto performance parts for many kinds of cars, buses, and trucks. It has years of OES and OEM precision regulators experiences and passed the TUV certification of ISO/TS16949 quality system. We have introduced advanced technology and equipment to integrate further development and manufacture. |
>> Products Show |
|
|
precision regulators Show |
|
|
|
1. CAP's dual-tank CO2 regulator assembly combines a precision regulator / flow gauge and an industrial solenoid valve. The unique ability to connect the REG-2 to TWO tanks of compressed CO2 allows double the run time between changing out the tanks. The flow gauge can be set from .5 to 15 SCFH. Designed to work with any 120 volt control device. Features a tank pressure gauge to indicate remaining tank pressure. Complete with 6 foot power cable and 10 foot of 1/4" air line. CO2 Generators. Carbon dioxide generators operate by burning carbonaceous fuels such as propane or natural gas. The burners used in theseCO2 generators are specially designed to maximize the production of CO2 and minimize heat as a by-product. These generators provide CO2 far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC. |
|
|
|
|
2. Precision Medical Inc. Easy Dial Regulator
* Each * Model # 168715D
Dual gauge design is superior to single gauge units; allows monitoring of input line pressure. Has a precision regulator with a combination M14 and M18 adapter on a 26" hose assembly. Gauges are protected by rubber boots. Instructions and case
Designed around the engraver and stonesetter need for power, finesse and control, the GraverMach provides it all in a compact package. The front mounted precision regulator is easy to adjust and use, the combination filter and water trap can be mounted on the machine or remotely for easy access. The dual voltage capability means you can use this machine anywhere in the world just by changing the IEC C13 industry standard power cord. The transformer is rated at 100 - 240 Volts, 50/60 Hz. and carries UL, GS, CE, and LPS certifications. From the first time you power up the GraverMach you will be amazed with its smooth, quiet performance. New porting technology gives your handpiece crisp impact from the low end to the high end. Stroke speed is adjustable from 400 to 8000 strokes per minute, the new front mounted bias valve setting allows the user to tailor the foot throttle feel. The power and air hookups are in the rear of the console and are mounted high to clear the bench top ledge found on many engraving and jewelry work surfaces. The handpiece hookups are now made with quick coupling fittings allowing the GraverMach to work with all your existing GraverMax handpieces. |
|
|
|
|
|
|
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian